The HAMAG CRAIV - 110 series of miniature mass spectrometers rely on the company's independently developed direct ionization mass spectrometry technology, which is a major breakthrough in the mass spectrometry field. Traditional mass spectrometers are often limited by the requirements for a vacuum environment and complex chromatographic separation processes, resulting in large - sized instruments, complex operations, and can only be operated in professional laboratory environments. However, direct ionization mass spectrometry technology cleverly bypasses these limitations. It can directly ionize samples rapidly under atmospheric pressure and then achieve mass spectrometry analysis. This innovation not only significantly shortens the detection time, reducing it from several hours or even longer in the past to just tens of seconds nowadays, but also remarkably reduces the detection cost, opening the door for mass spectrometers to be used in on - site detection scenarios.
The core of direct ionization mass spectrometry technology lies in its independently developed direct ionization ion source. This key component, like the "heart" of a mass spectrometer, is responsible for accurately charging target compounds and converting them into ions in a conventional environment. In actual operation, it is necessary to precisely control the ionization process and apply just - right "ionization forces" according to the characteristics of different compounds, which poses extremely high technical challenges. Relying on deep technical accumulation and continuous R & D investment, HAMAG has successfully developed 6 types of direct ionization ion sources with independent intellectual property rights, completely solving the "bottleneck" problem of China's core key components in direct ionization mass spectrometers. Among them, the direct ionization mass spectrometry ion source has been appraised as "internationally innovative", and the direct ionization mass spectrometer developed based on it has reached the "internationally leading level in key technical indicator sensitivity".
The hair drug detection - specific portable mass spectrometer CRAIV - 110H is designed specifically to meet the needs of accurate and rapid detection of drugs in hair samples in large - scale and high - volume scenarios. In the work of community rehabilitation and drug control, it is necessary to regularly test the hair of a large number of people for drugs to ensure the control effect. The screening of suspected drug users among public servants and the general public also faces challenges such as a large number of samples and high requirements for detection speed. CRAIV - 110H can easily handle these scenarios. It can accurately detect the types and contents of drugs from hair samples within just 20 seconds. Through advanced detection algorithms and an efficient data processing system, the instrument can accurately identify a variety of common drugs and their metabolites, providing strong data support for drug control work.
The drug seizure - specific portable mass spectrometer CRAIV - 110P demonstrates powerful multi - type sample analysis capabilities. It can not only qualitatively and quantitatively detect traditional drugs in solid and liquid forms, such as methamphetamine, heroin, ketamine, morphine, cocaine, MDMA, etc., but also effectively detect more than 200 new psychoactive substances, including synthetic cannabinoids, fentanyl - like substances, fluanisone, etc. At key nodes of drug circulation such as customs, border ports, and logistics transfer stations, CRAIV - 110P can quickly test various suspicious items, providing law enforcement officers with accurate drug information and assisting in combating drug - related criminal activities. It supports the blind - screening function. Even when facing samples with unknown components, it can quickly identify potential drug components by virtue of its powerful database and intelligent analysis algorithms, greatly improving the efficiency and accuracy of drug seizure work.
The fentanyl detection - specific portable mass spectrometer CRAIV - 110F plays a crucial role in important places such as customs and ports. Fentanyl - like substances are highly addictive and harmful, and their illegal circulation poses a serious threat to social security. CRAIV - 110F can quickly and accurately detect all fentanyl - like substances on - site in complex environments. The instrument adopts highly sensitive detection technology and targeted sample pretreatment methods, which can effectively eliminate interference and accurately detect trace amounts of fentanyl - like drugs, building a solid defense line to protect national security and prevent fentanyl - like drugs from flowing into the country.
CAS number 26392 - 63 - 2 is a nonanamide - type compound, named N - [2 - [2 - [2 - (2 - aminoethylamino) ethylamino] ethylamino] ethyl] nonanamide monoacetate.
Acetyl hexapeptide-8, also known as acetyl hexapeptide-3 and hexapeptide, with the commercial name Argireline, is a highly acclaimed ingredient in the cosmetics industry, excelling in anti-wrinkle and anti-aging applications.
1. CAS Number: 616204 - 22 - 9
2. Molecular Formula: C34H60N14O12S
3. Molecular Weight: 888.9
4. Appearance: It typically appears as a white powder with a purity of ≥99% and a peptide content of ≥85%.
Acetyl hexapeptide-8 is not directly extracted from natural organisms. Instead, it is obtained through chemical synthesis. The synthesis process adheres to strict Good Manufacturing Practice (GMP) standards. It goes through a series of professional steps, including synthesis, drying, cleavage, purification, freeze - drying, packaging, and warehousing. No additional components, preservatives, or antioxidants are added, and finally, a multi - morphological crystalline powder is obtained to ensure product quality compliance.
Muscle contraction is regulated by motor neurons. When neurotransmitters are released and bind to receptors on muscle cells, muscle contraction is triggered. Acetyl hexapeptide-8 can mimic the SNAP - 25 protein domain fragment and compete for the binding site of SNAP - 25 in the SNARE complex. The SNARE complex is composed of three proteins: VAMP, Syntaxin, and SNAP - 25. Once the stability of the SNARE complex is affected, vesicles cannot effectively release the neurotransmitter acetylcholine. As a result, muscle cells do not receive contraction signals, and muscle contraction activity is weakened, effectively reducing wrinkles caused by frequent muscle contractions, especially dynamic wrinkles. Additionally, acetyl hexapeptide-8 can stimulate skin cells to promote the synthesis of collagen (such as type I and type III collagen) and elastin, contributing to enhanced skin elasticity and improved skin laxity.
1. Wrinkle Reduction and Smoothing: As a high - quality anti - wrinkle ingredient, it exhibits high anti - wrinkle activity. It can effectively reduce dynamic wrinkles on the face caused by facial expressions, such as crow's feet, glabellar lines, and forehead wrinkles. Clinical studies have shown that among Chinese healthy female volunteers with an average age of 46.0 years (±7.2 years), continuous use of products containing 200ppm of acetyl hexapeptide-8 for 4 weeks can significantly reduce facial wrinkles. In 2002, the International Journal of Cosmetic Science reported that after continuous use of a 10% hexapeptide emulsion on healthy female volunteers for 30 days, the average wrinkle depth was reduced by 30%.
2. Skin Tightening: By promoting the production of collagen and elastin, it strengthens the skin's supporting structure, making the skin firmer and more elastic. It improves skin sagging and gives a more streamlined facial contour.
3. Gentle and Safe: Compared to botulinum toxin, acetyl hexapeptide-8 does not require injection. This avoids risks such as pain, erythema, and edema caused by puncture, as well as side effects such as upper eyelid ptosis, facial asymmetry, and speech difficulties due to toxin diffusion. It is safer and more gentle, making it suitable for a wider range of people.
4. Moisturizing and Antioxidant: Acetyl hexapeptide-8 has certain moisturizing properties, helping the skin retain moisture and maintain a hydrated state. It also has antioxidant activity, which can neutralize free radicals, reduce oxidative stress damage to the skin, and contribute to delaying skin aging.
Acetyl hexapeptide-8 is mainly applied in the cosmetics industry and is often added to various high - end skin care products.
1. Facial Care Products: Products such as serums and facial creams can comprehensively improve the condition of facial skin, reduce wrinkles, and enhance skin firmness and radiance. For example, La Mer Crème de la Mer, Estée Lauder Re-Nutriv Ultimate Lifting Crème, Hanshu Double - Tube Serum, and UNISKIN Firming Cream all contain this ingredient.
2. Eye Care Products: The addition of acetyl hexapeptide-8 to eye creams and eye masks can specifically address eye - area skin problems, reducing crow's feet and dark circles, and making the eye - area skin firmer and smoother. Products like Clinique Smart Clinical Repair Wrinkle Correcting Eye Cream and Winona Firming Eye Cream contain this ingredient.
3. Neck Care Products: Used in neck care products, it helps reduce neck wrinkles and improve the elasticity and firmness of neck skin.
1. Dosage: In cosmetic formulations, the recommended dosage of acetyl hexapeptide-8 is 20 - 500ppm, with a recommended dosage of more than 100ppm. The specific dosage may vary depending on product type and expected efficacy.
2. Storage Conditions: The product should be stored at 2 - 8°C in a dark place. The shelf life is usually 24 months to ensure its activity and stability.
3. Combined Use: To further enhance skin - care effects, acetyl hexapeptide-8 can be combined with palmitoyl peptides (such as palmitoyl tetrapeptide-7 and palmitoyl pentapeptide-4), hyaluronic acid, collagen, and antioxidant components (such as vitamin E and vitamin C). These components work synergistically with acetyl hexapeptide-8 to better care for the skin in terms of anti - wrinkle, moisturizing, and antioxidant effects.
Description | Argireline prevents formation of skin lines and wrinkles, inhibiting neurotransmitter release at the neuromuscular junction. Sequence: N-acetyl-Glu-Glu-Met-Gln-Arg-Arg-NH2. |
|
|
Density | 1.5±0.1 g/cm3 |
Molecular Formula | C34H60N14O12S |
Molecular Weight | 888.992 |
Exact Mass | 888.423584 |
PSA | 484.48000 |
LogP | -6.67 |
Appearance of Characters | white |
Index of Refraction | 1.661 |
Synonyms
N-Acetyl-L-α-glutamyl-L-α-glutamyl-L-methionyl-L-glutaminyl-L-arginyl-L-argininamide |
L-Argininamide, N-acetyl-L-α-glutamyl-L-α-glutamyl-L-methionyl-L-glutaminyl-L-arginyl- |
Argireline Acetate anti-aging cosMetic peptide |
Argirelin Acetate(Acetyl Hexapeptide-3) |
Ac-Glu-Glu-Met-Glu-Arg-Arg-NH2 |
Argreline Acetate |
Acetyl hexapeptide-3 |
Conotoxin peptide, Conotoxin anti-wrinkle peptide, Conotoxin botulinum toxin
Common Name | mu-conotoxin | ||
Molecular Weight | 2375.70 | ||
Density | 1.71±0.1 g/cm3 | Boiling Point | N/A |
Molecular Formula | C92H139N35O28S6 | Melting Point | N/A |
· Name: Mu-conotoxin
· INCI Name: Arginine/Lysine Polypeptide
· Molecular Formula: C92H139N35O28S6
Source and Extraction
Conotoxin peptide is a polypeptide substance extracted from the venom secreted by cone snails and obtained through artificial synthesis or biological simulation.
Mechanism of Action
· Blocking of Ion Channels: Conotoxin peptide can specifically block voltage-gated sodium channels, especially the Nav1.4 channel in muscles. It reduces the transmission of muscle contraction signals, thereby relaxing the muscles.
· Retention of Muscle Current Conduction: When the conotoxin peptide exerts its effect, it can retain 5% of the neuromuscular current conduction in the muscles, providing a natural rejuvenation effect and avoiding complete muscle stiffness and paralysis.
Efficacy Characteristics
· Significant Anti-wrinkle Effect: It can effectively improve dynamic wrinkles. By relaxing the muscles, it can instantly fade wrinkles, making the skin look younger.
· High Stability and Strong Penetrability: The conotoxin peptide is a highly folded peptide with a stable structure, which can strongly penetrate the skin and better exert its efficacy.
· High Safety: Relevant tests have shown that the conotoxin peptide has not exhibited any cytotoxicity, skin irritation, allergy, or eye irritation.
Application Fields
It is mainly applied in the cosmetics field. Many international brands such as Peter Thomas Roth, Natura Bissé, Revive, and Maria Galland have applied it in cosmetics. The product types include essence liquids, eye patches, forehead patches, eye creams, facial masks, etc.
Description μ-Conotoxin-CnIIIC is a 22-residue conopeptide that can be isolated from Conus consors. μ-Conotoxin-CnIIIC is a potent and persistent blocker of NaV1.4 channel. μ-Conotoxin-CnIIIC has analgesic, anaesthetic and myorelaxant properties[1][2].
Related Catalog
Signaling Pathways >> Membrane Transporter/Ion Channel >> Sodium Channel
Research Areas >> Inflammation/Immunology
Target
NaV1.4 Channel[2]
References
[1]. Markgraf R, et al. Mechanism and molecular basis for the sodium channel subtype specificity of µ-conopeptide CnIIIC. Br J Pharmacol. 2012 Oct;167(3):576-86.
[2]. Del Río-Sancho S, et al. Cutaneous iontophoresis of μ-conotoxin CnIIIC-A potent NaV1.4 antagonist with analgesic, anaesthetic and myorelaxant properties. Int J Pharm. 2017 Feb 25;518(1-2):59-65.
Product Introduction
I. Product Overview
Oxytocin Acetate, a natural protein hormone with crucial physiological regulatory functions, plays an extremely important role in the process of life activities. It is synthesized by the hypothalamus, stored in the posterior pituitary gland, and released into the bloodstream upon stimulation by specific physiological signals, thereby exerting extensive and key regulatory effects on the body.
| Name | Oxytocin acetate salt | ||||
| CAS Number | 50-56-6 | Molecular Weight | 1007.187 | ||
| Density | 1.3±0.1 g/cm3 | Boiling Point | 1533.3±65.0 °C at 760 mmHg | ||
| Molecular Formula | C43H66N12O12S2 | Melting Point | 192-194°C | ||
| MSDS | Available | Flash Point | 881.1±34.3 °C | ||
| Density | 1.3±0.1 g/cm3 | ||||
| Boiling Point | 1533.3±65.0 °C at 760 mmHg | ||||
| Melting Point | 192-194°C | ||||
| Molecular Formula | C43H66N12O12S2 | ||||
| Molecular Weight | 1007.187 | ||||
| Flash Point | 881.1±34.3 °C | ||||
| Exact Mass | 1006.436462 | ||||
| PSA | 450.13000 | ||||
| LogP | -4.26 | ||||
| Vapour Pressure | 0.0±0.3 mmHg at 25°C | ||||
| Index of Refraction | 1.554 | ||||
| Storage condition | 2-8°C | ||||
II. Special Function.
(I) Precision Support for Maternal and Infant Health, Ensuring Reproductive Safety
1. Efficient Induction and Augmentation of Labor: During childbirth, Oxytocin Acetate can accurately mimic the uterine contraction pattern during natural childbirth, stimulating rhythmic contractions of the uterine smooth muscle. As the pregnancy progresses, the uterus becomes increasingly sensitive to it, reaching its peak at full - term. This effectively promotes cervical dilation, facilitates a smooth delivery, significantly reduces the risk of dystocia, and ensures the safety of both the mother and the baby. A large amount of clinical data shows that the rational use of Oxytocin Acetate can increase the success rate of natural childbirth.
2. Prevention and Treatment of Postpartum Hemorrhage: After childbirth or abortion, if uterine bleeding occurs due to uterine atony or poor involution, Oxytocin Acetate can act quickly, enhance uterine contractility, effectively compress the blood vessels in the myometrium, reduce bleeding, and decrease the incidence of postpartum hemorrhage - related complications, laying a solid foundation for the mother's postpartum recovery. Relevant studies have shown that after using Oxytocin Acetate, the incidence of postpartum hemorrhage can be reduced less.
3. Promotion of Breastfeeding: Oxytocin Acetate not only acts on the uterus but also stimulates the contraction of the smooth epithelial cells around the mammary alveoli, acting like a "switch" to start the milk delivery process. It helps milk flow smoothly from the breast, promotes the successful establishment of breastfeeding, provides the best nutritional source for newborns, and strengthens the emotional bond between the mother and the baby. According to statistics, with the assistance of Oxytocin Acetate, the success rate of breastfeeding has increased.
(II) Regulation of Physical and Mental State, Alleviation of Stress and Anxiety
1. Antistress "Buffer": In the face of various pressures and traumas in life, Oxytocin Acetate serves as an "antistress guard" within the human body. It can effectively regulate the body's stress response system, reduce the level of cortisol (the main stress hormone), help individuals recover quickly from a state of tension, relieve anxiety, enhance psychological resilience, and enable people to maintain emotional stability and a good psychological state in a stressful environment. Studies have found that in stressful situations, the supplementation of Oxytocin Acetate can reduce the individual's anxiety score.
2. Pro - social Behavior Booster: Known as the "love hormone" and "cuddle hormone", Oxytocin Acetate plays a crucial role in social interactions. When people have positive social contacts, such as hugs and intimate conversations, the secretion of Oxytocin Acetate in the body increases, stimulating individuals to generate a sense of trust and intimacy, promoting the establishment and deepening of emotional connections between people, improving the quality of social interactions, and creating a harmonious interpersonal atmosphere. Experiments have shown that after exposure to Oxytocin Acetate, people's willingness to cooperate in social interactions has increased.
(III) Excellent Quality Assurance, Stable and Reliable
1. High Purity and Activity: Our Oxytocin Acetate product adopts advanced production processes and strict quality control systems to ensure that the peptide purity of the product, as detected by HPLC, is ≥99.0%. It has a high degree of biological activity, can accurately and efficiently act on the corresponding targets in the human body, and exert the expected physiological regulatory functions, providing a solid quality guarantee for medical and scientific research applications.
2. Good Stability: In terms of storage, this product performs outstandingly. At room temperature, the shelf life can reach 8 months; if stored at a low temperature of - 20°C, the shelf life is extended to 18 months, which greatly facilitates the storage and transportation of the product, reduces the risk of product quality problems caused by storage conditions, and ensures that customers can use stable and reliable products in different scenarios.
III. Application Areas
1. Medical Field: Widely used in obstetrics and gynecology clinics for labor induction, labor augmentation, treatment of postpartum and post - abortion uterine bleeding; it also plays an important role in the oxytocin challenge test to understand placental reserve function. In addition, the nasal drops formulation can assist in promoting milk ejection and support breastfeeding. In recent years, Oxytocin Acetate has also shown potential application value in the treatment of some non - reproductive system diseases, such as relieving postoperative gastrointestinal motility retardation.
2. Scientific Research Field: As an important scientific research reagent, in basic scientific research such as molecular biology and pharmacology, it helps researchers deeply explore its mechanisms of action in multiple fields such as reproductive physiology, neuroendocrine regulation, and social behavior, providing key research tools for the scientific development of related fields.
Precautions: High - dose use of Oxytocin Acetate may lead to tetanic contractions of the uterus, causing serious risks such as fetal asphyxia and uterine rupture. Therefore, it is necessary to strictly control the dosage. In addition, some individuals may be allergic to Oxytocin Acetate. It is necessary to carefully understand the patient's allergy history before use and closely observe adverse reactions during use.
Our Oxytocin Acetate, with its excellent efficacy, reliable quality, and wide range of application values, is sure to become your powerful assistant in the medical and scientific research fields, contributing to the protection of maternal and infant health and the promotion of scientific research development.
Carbetocin Acetate (CAS Number: 37025-55-1)
Product Introduction
Chemical & Physical Properties
| Density | 1.2±0.1 g/cm3 |
| Boiling Point | 1477.9±65.0 °C at 760 mmHg |
| Molecular Formula | C45H69N11O12S |
| Molecular Weight | 988.161 |
| Flash Point | 847.6±34.3 °C |
| Exact Mass | 987.484802 |
| PSA | 387.81000 |
| LogP | -3.59 |
| Vapour Pressure | 0.0±0.3 mmHg at 25°C |
| Index of Refraction | 1.533 |
| Storage condition | 2-8℃ |
Carbetocin Acetate, a crucial active pharmaceutical ingredient (API) in the global obstetric field for the prevention and treatment of postpartum hemorrhage, is an ideal choice for pharmaceutical companies due to its outstanding performance and stable quality. Our product stands out in the international market with three core advantages.
1. Ultra-high Purity and Stable Quality, Ensuring Efficacy of Final Products
The Carbetocin Acetate API we produce boasts a purity of over 99%. The production and quality control processes strictly adhere to international GMP standards and ICH guidelines. Each batch undergoes sophisticated testing using methods such as HPLC and NMR, ensuring that the impurity content is far below the pharmacopoeia standards. Its stable chemical properties allow it to maintain long-term activity stability under low-temperature storage conditions at -15°C, effectively reducing the production risks for formulation companies. Whether used for developing injections or long-acting sustained-release formulations, it can guarantee the high efficiency and safety of end products, helping customers create trustworthy branded products.
2. Optimized Processes, Achieving a Win-win in Cost and Environmental Protection
Our innovative synthesis processes significantly shorten the production cycle and reduce raw material consumption, cutting costs by more than 20% compared to traditional processes. Moreover, we place great emphasis on green production. Through solvent recovery and waste recycling technologies, we minimize the environmental impact of the production process, meeting the requirements of EU REACH regulations and US FDA environmental protection standards. This not only helps customers control procurement costs but also enables them to meet the increasingly stringent environmental compliance requirements of the global market, enhancing the sustainable competitiveness of the supply chain.
3. Flexible Customization, Adapting to Global Market Demands
We offer customized services for various specifications and packaging options, promptly responding to orders ranging from small laboratory packages to large-scale industrial orders. For different national pharmacopoeia standards (such as EP, USP, ChP), we provide precise index optimization solutions to ensure seamless integration with global registration processes. Our professional technical team can also offer comprehensive technical support from API to formulation development, assisting customers in accelerating product launch and seizing the market opportunities in postpartum hemorrhage treatment drugs.
With excellent quality, cost advantages, and flexible services, our Carbetocin Acetate API has served customers in more than 30 countries worldwide, becoming a trusted partner in the field of obstetric medications. We look forward to working with you to jointly provide high-quality solutions for maternal health globally.
Octreotide Acetate (CAS 79517 - 01 - 4)
Product Introduction
I. Core Product Characteristics
Chemical & Physical Properties
| Density | 1.4±0.1 g/cm3 |
| Boiling Point | 1447.2±65.0 °C at 760 mmHg |
| Melting Point | 153-156ºC |
| Molecular Formula | C51H70N10O12S2 |
| Molecular Weight | 1079.29 |
| Flash Point | 829.1±34.3 °C |
| PSA | 382.82000 |
| LogP | 0.77 |
| Vapour Pressure | 0.0±0.3 mmHg at 25°C |
| Index of Refraction | 1.673 |
(A) Properties and Structure
Octreotide acetate bulk drug appears as a white powder or lyophilized powder, exhibiting excellent chemical stability under normal storage conditions. To maximize its biological activity, storage at -20°C under lyophilized and light-protected conditions is recommended. Chemically, it is a synthetic octapeptide compound, serving as an analog of the tetradecapeptide somatostatin. With a molecular formula of C₅₁H₇₀N₁₀O₁₂S₂ and a molecular weight of approximately 1079.29, its molecular structure contains two cysteine residues that cyclize the polypeptide chain through a disulfide bond. This unique structural design is crucial for maintaining its biological activity, laying a solid foundation for downstream formulation production.
(B) Fundamental Mechanism of Action
Octreotide acetate bulk drug has a well-defined mechanism of action, serving as the core for the efficacy of numerous formulations. It binds to somatostatin receptors (SSTR) in the human body, with a higher affinity for SSTR2 and SSTR5. Upon binding, it inhibits the activity of adenylate cyclase, reducing the intracellular production of cAMP, thereby suppressing the secretion of various hormones such as growth hormone, insulin, etc. Additionally, it regulates ion channels, influencing cellular functions. Its mechanisms of action in the digestive and vascular systems provide a reliable basis for developing formulations for treating diseases such as acromegaly and gastroenteropancreatic endocrine tumors.
II. Diverse Application Values
(A) High-Quality Raw Material for Formulation Production
As a bulk drug, octreotide acetate is the key raw material for producing various formulations. It can be used to prepare long-acting sustained-release formulations for acromegaly, effectively controlling growth hormone levels in patients who have failed surgery, radiotherapy, or treatment with dopamine receptor agonists, or those who are unable or unwilling to undergo surgery, and alleviating symptoms such as enlarged hands and feet and facial changes. It can also be used to develop formulations for relieving symptoms associated with gastroenteropancreatic endocrine tumors. For carcinoid tumors with carcinoid syndrome, VIPomas, glucagonomas, etc., it improves symptoms like facial flushing, diarrhea, and hyperglycemia by inhibiting related hormone secretion.
(B) Raw Material for Preventive and Emergency Formulations
Octreotide acetate bulk drug is indispensable for producing formulations to prevent postoperative pancreatic complications. Clinically proven, injection formulations made from this raw material, when used before surgery, can inhibit pancreatic secretion, reduce the risk of complications such as pancreatic fistula and infection, and promote postoperative recovery. Furthermore, for the emergency treatment of esophageal-gastric variceal bleeding caused by liver cirrhosis, formulations prepared from this bulk drug can be used in conjunction with endoscopic sclerotherapy. They achieve rapid hemostasis by reducing splanchnic blood flow and portal venous pressure, buying time for further treatment.
III. Outstanding Competitive Advantages
(A) High Activity and Stability
During the production process, octreotide acetate bulk drug is strictly controlled using advanced technologies to ensure its high biological activity and chemical stability. Thanks to its unique molecular structure, it demonstrates stronger inhibitory effects on hormones like growth hormone and glucagon compared to similar raw materials, guaranteeing the high efficacy of downstream formulations. Its stable chemical properties also prevent deterioration during formulation production and storage, extending the shelf life of the formulations.
(B) Strong Formulation Adaptability
This bulk drug features excellent physical and chemical properties, allowing it to flexibly adapt to various formulation production processes. Whether made into injections, lyophilized powder injections, or long-acting sustained-release formulations, it maintains stable performance and biological activity. Its good solubility and dispersibility facilitate mixing with other excipients, meeting the production requirements of different dosage forms and providing convenience for pharmaceutical companies to develop diversified products.
(C) Quality and Regulatory Advantages
Manufactured in strict accordance with international advanced production standards and quality management systems, every production step, from raw material procurement to finished product delivery, undergoes rigorous testing. The product quality complies with the standards of various pharmacopoeias, such as the Chinese Pharmacopoeia, the United States Pharmacopeia, and the European Pharmacopoeia, ensuring unimpeded global market circulation and providing partners with high-quality, reliable, and compliant raw materials.
Terlipressin Acetate - An Exceptional API Solution
Product Overview
Chemical & Physical Properties
| Density | 1.5±0.1 g/cm3 |
| Boiling Point | 1824.0±65.0 °C at 760 mmHg |
| Molecular Formula | C52H74N16O15S2 |
| Molecular Weight | 1227.372 |
| Flash Point | 1056.9±34.3 °C |
| Exact Mass | 1226.496094 |
| PSA | 563.45000 |
| LogP | -6.75 |
| Vapour Pressure | 0.0±0.3 mmHg at 25°C |
| Index of Refraction | 1.664 |
| Storage condition | -20°C |
Terlipressin Acetate, with the CAS number 14636 - 12 - 5, is a highly valuable active pharmaceutical ingredient (API) in the medical field. Its chemical name is triglycyl-lysine vasopressin acetate. As a synthetic long-acting vasopressin preparation, it plays a crucial role in the treatment of various diseases.
Properties
This product appears as a white or off-white loose block or powder, and it is hygroscopic. Terlipressin Acetate exhibits excellent solubility in water and 1% acetic acid solution. This characteristic provides great convenience for formulation and processing during pharmaceutical production, ensuring precise preparation of various dosage forms to meet diverse clinical application requirements.
Product Highlights
Unique Mechanism of Action - Long-lasting and Stable Efficacy Release
Terlipressin Acetate is a prodrug that is inactive by itself. After entering the human body, through the action of aminopeptidase, it slowly removes the three glycyl residues at the N-terminus, continuously releasing active lysine vasopressin. Thanks to this unique "slow-release" mechanism, a single administration can maintain smooth muscle contraction for up to 10 hours. In contrast, the activity of the same dose of ordinary vasopressin can only last for 20 - 40 minutes. With its long-lasting and stable efficacy release, Terlipressin Acetate can reduce the frequency of administration in clinical treatment, improve patient compliance, and ensure the continuity and stability of therapeutic effects, providing patients with a more reliable treatment experience.
Wide Clinical Applications - Therapeutic Potential in Multiple Fields
2. Hepatorenal Syndrome: It can reduce plasma renin concentration, increase renal blood flow in patients with hepatorenal syndrome, effectively improve renal function, and increase urine output, which is of great significance for improving the liver and kidney conditions of patients and delaying disease progression.
3. Other Fields: Terlipressin Acetate is also likely to play a beneficial role in refractory shock and cardiopulmonary resuscitation, demonstrating its therapeutic potential in multiple fields and providing new possibilities for the treatment of more complex diseases.
High Safety and Reliability - A Trustworthy Choice for Clinical Use
Due to the slow enzymatic hydrolysis rate, lysine vasopressin will not reach toxic levels during circulation. Compared with traditional vasopressin, Terlipressin Acetate has a longer-lasting effect and does not cause serious complications such as fibrinolytic promotion and cardiovascular problems. It has a simple and convenient administration method via intravenous injection, making it especially suitable for the emergency rescue and treatment of critically ill patients. Our strict production standards and quality control system ensure the stable and reliable quality of each batch of products, providing medical professionals and patients with a highly safe and trustworthy treatment option.
Quality Assurance
We are equipped with advanced production facilities and a production process that strictly adheres to cGMP standards. Every step, from raw material procurement to finished product delivery, is strictly controlled and tested. The product purity, detected by high-performance liquid chromatography (HPLC), consistently meets the high standard of ≥95%, conforming to various international quality specifications, and providing a solid guarantee for your production needs.
Application Areas
Primarily applied in the pharmaceutical industry, it is used for the production of injectable drugs for the treatment of diseases such as esophageal variceal bleeding, hepatorenal syndrome, and refractory shock.
Storage Conditions
Please store the product at 4°C, keep it sealed, and avoid moisture and light exposure to ensure the long-term stability of product quality.
Should you have any inquiries or requirements regarding Terlipressin Acetate API, please feel free to contact us. Our professional team is dedicated to serving you and looks forward to collaborating with you to create a brighter future in the pharmaceutical field.
| Trabectedin Chemical Properties |
| Melting point | >143°C (dec.) |
| alpha | D25 +114° (c = 0.1 in methanol) |
| density | 1.55±0.1 g/cm3 (20 ºC 760 Torr) |
| storage temp. | -20°C Freezer, Under inert atmosphere |
| solubility | Chloroform (Slightly), Methanol (Slightly) |
| pka | 9.73±0.40(Predicted) |
| form | Solid |
| color | Light Yellow to Yellow |
| optical activity | -53.824.5 (CHCl3) |
| InChIKey | PKVRCIRHQMSYJX-HAHYLZASNA-N |
Trabectedin API Product Introduction
Overview
Trabectedin, with the CAS number 114899-77-3, is a highly specialized and sought-after active pharmaceutical ingredient (API) revolutionizing the field of oncology. This synthetic compound, renowned for its potent anti-cancer properties, serves as the cornerstone for developing cutting-edge treatments for a variety of malignancies.
Properties
Trabectedin API presents as a yellow to orange solid powder, exuding a distinct visual identity. It demonstrates limited solubility in water, but shows better solubility in organic solvents like dimethyl sulfoxide (DMSO) and ethanol. This solubility profile provides flexibility in formulating various pharmaceutical products, enabling manufacturers to create effective dosage forms tailored to diverse clinical needs. The powder is stable under appropriate storage conditions, maintaining its integrity and potency over time, which ensures reliable performance during the manufacturing process and in the final drug products.
Product Highlights
1. Unique and Potent Anti-cancer Mechanism
Trabectedin stands out in the oncology landscape with its novel mode of action. Unlike traditional chemotherapeutic agents, it doesn't merely disrupt cell division but targets the DNA repair mechanisms within cancer cells. By binding to the minor groove of DNA, it forms adducts that interfere with transcription processes and trigger apoptosis, or programmed cell death, in cancer cells. This targeted approach not only effectively eliminates tumor cells but also minimizes damage to healthy cells, reducing the severity of side effects commonly associated with chemotherapy. Its unique mechanism has been proven effective against soft tissue sarcomas and ovarian cancer, offering new hope for patients who may not respond well to conventional treatments. For pharmaceutical companies, leveraging this unique mechanism allows for the development of differentiated and highly effective oncology drugs, providing a competitive edge in the market.
2. Broad Clinical Application Potential
While already approved for the treatment of advanced soft tissue sarcoma and ovarian cancer, Trabectedin's potential extends far beyond these indications. Ongoing clinical trials are exploring its efficacy in treating other aggressive cancers such as breast cancer, lung cancer, and pediatric tumors. This wide-ranging clinical applicability positions Trabectedin as a versatile API for pharmaceutical developers. As research progresses and more indications are discovered, drugs formulated with Trabectedin API will have access to larger patient populations, translating into significant market opportunities. For healthcare providers and patients alike, the expanding range of applications means more treatment options and increased chances of finding an effective therapy for challenging cancers.
3. Superior Safety and Tolerability Profile
Compared to many other anti-cancer drugs, Trabectedin offers a more favorable safety and tolerability profile. Its targeted action reduces the impact on normal, rapidly dividing cells like those in the bone marrow, hair follicles, and gastrointestinal tract, which are often the source of severe side effects in chemotherapy. This results in fewer occurrences of debilitating symptoms such as neutropenia, alopecia, and severe nausea, allowing patients to maintain a better quality of life during treatment. For pharmaceutical companies, the relatively mild side effect profile makes drugs containing Trabectedin API more appealing to patients and healthcare providers, facilitating market acceptance and potentially leading to increased market share. Additionally, the improved tolerability may enable more consistent treatment regimens, enhancing treatment efficacy and patient outcomes.
Quality Assurance
Our Trabectedin API is manufactured in state-of-the-art facilities that adhere strictly to international cGMP standards. Rigorous quality control processes are implemented at every stage of production, from raw material sourcing to final product release. Advanced analytical techniques, including high-performance liquid chromatography (HPLC) and mass spectrometry, are used to ensure the product's purity, potency, and consistency, with a minimum purity level of 98%. Our commitment to quality guarantees that you receive a reliable and high-performing API that meets the most stringent regulatory requirements worldwide.
Application Areas
Primarily used in the development and production of oncology drugs for the treatment of soft tissue sarcoma, ovarian cancer, and other cancers under clinical investigation. Ideal for pharmaceutical companies engaged in anti-cancer drug research, development, and manufacturing, as well as contract manufacturing organizations (CMOs) looking to incorporate a high-quality, innovative API into their product portfolio.
Storage Conditions
Store the product at 2 - 8°C in a dry, well-ventilated area away from direct light. Keep the container tightly sealed to prevent moisture absorption and contamination, ensuring the long-term stability and integrity of the API.
If you have any questions or require further information about our Trabectedin API, please do not hesitate to contact us. Our dedicated team of experts is ready to assist you and explore potential collaborations to drive innovation in the field of oncology.
Description
Retatrutide, CAS number 2381089-83-2
CAS Number | 2381089-83-2 | Molecular Weight | 4731.33 |
Density | N/A | Boiling Point | N/A |
Molecular Formula | C221H342N46O68 | Melting Point | N/A |
Retatrutide is a triple agonist peptide of the glucagon receptor (GCGR), glucosedependent insulinotropic polypeptide receptor (GIPR), and glucagon-like peptide-1 receptor (GLP-1R). LY3437943 inhibits for human GCGR, GIPR, and GLP-1R with EC50 values of 5.79, 0.0643 and 0.775 nM, respectively. LY3437943 can be used for the research of obesity
I. Product Features
1. Cutting - edge R & D Process
After years of scientific research and development, we have utilized advanced biotechnologies and synthetic processes. This ensures that Retatrutide has an ultra - high purity, with the content of active ingredients far exceeding the industry average. Thanks to its precisely designed molecular structure, the product is highly stable and can maintain excellent activity under different storage conditions, laying a solid foundation for subsequent production and processing.
0. Unique Mechanism of Action
Retatrutide targets [EC50 (for human): 5.79 (GCGR), 0.0643 (GIPR), 0.775 nM (GLP-1R) [1]. EC50 (for mouse): 2.32 (GCGR), 0.191 (GIPR), 0.794 nM (GLP-1R) [1]. Ki (for human): 5.6 (GCGR), 0.057 (GIPR), 7.2 nM (GLP-1R) [1]. Ki (for mouse): 73 (GCGR), 2.8 (GIPR), 1.3 nM (GLP-1R)]. providing a powerful tool for pharmaceutical R & D and life science research.
II. Application Scenarios
1. Pharmaceutical R & D Field
As a core raw material for innovative drug development, Retatrutide can assist pharmaceutical companies in developing new therapeutic drugs for obesity. Its unique biological activity can accelerate the drug R & D process, improve R & D efficiency, and provide new solutions for conquering difficult diseases.
0. Scientific Research Experiment Scenarios
In life science research, Retatrutide is an essential research tool. Scientists use it to deeply explore methods, providing key data support for basic research and clinical application research, and promoting the transformation of scientific research achievements.
- [C20(OtBu)-Glu(AEEA-AEEA)-OtBu](https://www.septacapvials.com/products/C20OtBu-GluAEEA-AEEA-OtBu.html): - [Tirzepatide](https://www.septacapvials.com/products/Tirzepatide-1.html):
| Tirzepatide | |||
| CAS Number | 2023788-19-2 | Molecular Weight | 4813.45 |
| Density | N/A | Boiling Point | N/A |
| Molecular Formula | C225H348N48O68 | Melting Point | N/A |
Tirzepatide is a dual glucose-dependent insulinotropic polypeptide (GIP) and glucagon-like peptide-1 (GLP-1) receptor agonist that is being developed for the treatment of type 2 diabetes. Tirzepatide (LY3298176) shows significantly better efficacy with regard to glucose control and weight loss than do Dulaglutide
1. Exceptional Research - Oriented Attributes
1.1 High - Purity Composition
Our Tirzepatide is manufactured with state - of - the - art techniques, ensuring an extremely high purity level. This high - purity characteristic is crucial for accurate and reliable research results. Whether it is in vitro cell - based experiments or in - depth in - vivo animal studies, the pure form of Tirzepatide minimizes interference factors, allowing researchers to precisely observe and analyze its effects on various biological processes.
1.2 Stable Molecular Structure
The molecular structure of Tirzepatide is highly stable, which is a significant advantage in long - term research projects. It can maintain its integrity under different storage conditions and experimental environments, providing consistent performance throughout the research cycle. This stability ensures that the data obtained from experiments are comparable and reproducible, greatly facilitating the research process.
2. Extensive Applications in R & D
2.1 Diabetes Research and Drug Development
Tirzepatide has shown remarkable potential in diabetes research. Its unique dual - agonistic mechanism on the GLP - 1 and GIP receptors makes it an ideal candidate for developing novel diabetes medications. For pharmaceutical companies and research institutions engaged in diabetes drug R & D, Tirzepatide can serve as a fundamental building block. It enables the exploration of new therapeutic strategies, such as combination therapies, and the optimization of existing treatment regimens.
2.2 Obesity and Metabolic Disorder Studies
In the field of obesity and metabolic disorder research, Tirzepatide also plays a pivotal role. By regulating appetite and energy metabolism, it offers valuable insights into understanding the underlying mechanisms of these conditions. Research teams can use Tirzepatide to develop new diagnostic tools, biomarkers, and potential treatment modalities for obesity and related metabolic disorders.
3. Unparalleled Support for R & D Partners
3.1 Technical Consultation
Our professional team of biopharmaceutical experts is available to provide in - depth technical consultations. We can assist R & D teams in experimental design, dosage selection, and data interpretation. Whether you are a novice in the field or an experienced researcher, our technical support will help you make the most of Tirzepatide in your projects.
3.2 Customized Solutions
Understanding that different R & D projects have unique requirements, we offer customized solutions. We can adjust the packaging, quantity, and purity levels of Tirzepatide according to your specific needs, ensuring seamless integration into your research and development workflows.
Partner with us today and unlock the full potential of Tirzepatide in your scientific research and drug development projects. Let's work together to drive innovation in the biopharmaceutical industry.
Liraglutide API Product Introduction
Chemical & Physical Properties
| Molecular Formula | C172H265N43O51 |
| Molecular Weight | 3751.20000 |
| Exact Mass | 3748.95000 |
| PSA | 1513.76000 |
| LogP | 6.12960 |
| Storage condition | -20°C |
Overview
Liraglutide, with the CAS Number 204656 - 20 - 2, is a highly regarded active pharmaceutical ingredient (API) that has transformed the treatment landscape for metabolic disorders. As a synthetic analog of human glucagon - like peptide - 1 (GLP - 1), it plays a pivotal role in developing medications that effectively manage type 2 diabetes and obesity, offering significant benefits to patients worldwide.
Properties
Liraglutide API typically presents as a white to off - white solid powder. It exhibits specific solubility properties, showing good solubility in aqueous solutions under appropriate pH conditions. This solubility characteristic is crucial for formulating various pharmaceutical dosage forms, such as injectables, ensuring the smooth and efficient manufacturing of final drug products. Under proper storage conditions, usually at 2 - 8°C, the powder maintains excellent stability, preserving its chemical and physical properties over time. This stability guarantees consistent quality in the manufacturing process and reliable performance in the end - user products.
Product Highlights
1. Glucose - Dependent Insulin Regulation for Precise Blood Sugar Control
Liraglutide stands out with its unique glucose - dependent insulin - releasing mechanism. By mimicking the actions of GLP - 1, it stimulates insulin secretion only when blood glucose levels are elevated, effectively reducing the risk of hypoglycemia, a common side effect of many traditional diabetes medications. This targeted approach ensures precise blood sugar regulation, helping patients maintain stable glucose levels throughout the day. Moreover, Liraglutide also slows down gastric emptying and suppresses appetite, further contributing to better blood sugar management and promoting weight loss. For pharmaceutical companies, this precise and safe mechanism allows for the development of highly effective diabetes and weight - management drugs, giving them a competitive edge in the market.
2. Versatile Clinical Applications for Multiple Health Conditions
Liraglutide is not only a cornerstone in the treatment of type 2 diabetes but also has demonstrated remarkable efficacy in managing obesity. Approved for both indications, it offers a dual - benefit solution, addressing two major global health challenges simultaneously. In diabetes treatment, it significantly reduces HbA1c levels, improving long - term glycemic control and reducing the risk of diabetes - related complications. For obesity, it helps patients achieve substantial and sustainable weight loss, enhancing their overall health and quality of life. Additionally, ongoing research is exploring its potential applications in other conditions, such as non - alcoholic fatty liver disease, expanding its clinical utility even further. This versatility makes Liraglutide API an attractive choice for pharmaceutical developers aiming to create multi - indication drugs and reach a broader patient population.
3. Established Market Presence and Growth Potential
With its proven efficacy and safety, Liraglutide has already established a strong presence in the global pharmaceutical market. The increasing prevalence of type 2 diabetes and obesity worldwide continues to drive the demand for Liraglutide - based medications. As more patients seek effective treatment options, and with the potential for new indications emerging from research, the market for Liraglutide API is set to grow steadily.partnering with us for Liraglutide API provides an excellent opportunity to tap into this expanding market. Whether it's for developing branded drugs, generic formulations, or for contract manufacturing, Liraglutide API offers a reliable and profitable business prospect in the dynamic pharmaceutical industry.
Quality Assurance
Our Liraglutide API is manufactured in state - of - the - art facilities that adhere rigorously to international Current Good Manufacturing Practice (cGMP) standards. A comprehensive quality control system is in place throughout the production process, from the sourcing of raw materials to the final packaging of the product. Advanced analytical techniques, including high - performance liquid chromatography (HPLC) and mass spectrometry, are used to ensure the API's high purity (≥ [99]%), consistent potency, and stability. Our commitment to quality ensures that you receive a top - notch product that meets and exceeds the strictest regulatory requirements globally, providing a solid foundation for your pharmaceutical manufacturing and business success.
Application Areas
Primarily used in the development and production of medications for the treatment of type 2 diabetes and obesity. Also serves as a key ingredient in research and development for potential new indications related to metabolic disorders. Ideal for pharmaceutical companies involved in drug discovery, development, and manufacturing, as well as contract manufacturing organizations (CMOs) looking to add high - demand and high - quality APIs to their product portfolios.
Storage Conditions
Store Liraglutide API in a cool, dry place at 2 - 8°C, away from direct light. Keep the container tightly sealed to prevent moisture absorption and contamination, ensuring the long - term stability and quality of the product.
If you have any questions or require further information about our Liraglutide API, please do not hesitate to contact us. Our dedicated team of experts is ready to assist you and explore potential business collaborations to drive success in the pharmaceutical market.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
- [1ml blue dot with red and yellow rings clear glass ampoules by Hamag](https://www.septacapvials.com/products/Glass-Ampoules-49.html):
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.
Form A/B/C/D/E International standard glass ampoule, for injection use.
Special design ampoules, customized ampoule, OEM ampules.
1ml ampoule, 2ml ampoule, 3ml ampoule, 4ml ampoule, 5ml ampoule, 6ml ampoule, 7ml ampoule, 8ml ampoule, 9ml ampoule, 10ml ampoule, 12ml ampoule, 15ml ampoule, 16ml ampoule, 18ml ampoule, 20ml ampoule, 25ml ampoule, 30ml ampoule.
small mouth ampoules, closed type ampoule, flare opening ampoules
made out of EP/USP type I borosilicate glass.
1.Color:clear transparent or amber brown
2.Standard: USP EP JP CFDA ISO YBB
3.Volume: 1-25ml
4.Material: borosilicate glass
5.Dimension could be customized
6.Clients' Logo/content could be ceramic printed upon authorization
7.Different color ring available
8.OPC or breaking ring, breaking force 30-80N.
9.Customized printing upon authorization.
Material and Classification
· Material: It mainly includes neutral glass, barium-containing glass, and zirconium-containing glass. Neutral glass is a type of low-borosilicate glass with good chemical stability. Barium-containing glass has good alkali resistance, and zirconium-containing glass has excellent resistance to both acids and alkalis.
· Classification: According to the color, it can be divided into colorless transparent and amber types. The amber-colored ones can filter out ultraviolet rays, making them suitable for containing photosensitive drugs. According to the style, it is divided into necked ampoules and powder ampoules. Powder ampoules have been basically phased out. Necked breakable ampoules are further divided into scored neck breakable ampoules and color ring breakable ampoules.
There is three different type of glass defined by USP/EP, type I, type II, type III.
Type I: borosilicate glass
Type II: treated type III glass
Type III: Soda-lime glass
While for moulded vials there are soda-lime glass in use, while most ampules manufacturers already aborted type II and/or type III glass.
But USP type I glass, there are some difference to tell: light-borosilicate glass, neutral borosilicate glass, high borosilicate glass.
Light borosilicate glass is on China was trying to produce neutral, but Hamag Group was not able to develop technology at that time.
All other glass forming companies are coming to purchase from Hamag Group. a long queue of trucks aside the road of our factory.
Some people is using high-borosilicate glass tubing to substitute neutral glass ampoules and vials. which is still workable, but not match quality control standard. Hamag Group is long history company who treasure reputation a lot. only supply products on agree quality level and conditions.
Specifications and Capacity
Common capacity specifications of glass ampoules include 1mL, 2mL, 5mL, 10mL, and 20mL, etc., which can meet the requirements of different drug dosages.
Features and Advantages
· Good Sealing Performance: The glass material and sealing process ensure that the drug does not come into contact with the outside air, preventing the drug from oxidation and deterioration. For example, some oxidizable injection agents packaged in glass ampoules can have an extended shelf life.
· High Chemical Stability: Different glass ampoule materials can adapt to the acidity and alkalinity of a variety of drugs. During long-term contact with the liquid medicine, there will be no phenomena such as shedding, degradation, and substance migration.
· Excellent Transparency: The colorless transparent ampoules are beneficial for the clarity inspection of the liquid medicine, making it convenient to observe whether there are quality problems such as precipitation and turbidity in the drug.
· Good Heat Resistance: It can withstand the pressure difference generated during autoclaving, as well as the temperature shock during the washing and sterilization processes, and is not prone to cold explosion and breakage.
Structure and Principle
· Color Ring Necked Breakable Ampoules: A low-melting-point powder with a coefficient of expansion twice that of the ampoule glass is fused and fixed at the neck of the ampoule to form a ring. After cooling, a permanent stress is generated at the ring part, and it can be broken off neatly with a little force, and it is not easy to produce glass debris.
· Scored Neck Breakable Ampoules: There is a fine score at the neck part, and a color dot with a diameter of 2mm is marked at the center of the score. When breaking it, apply force to the back of the middle of the score, and the broken section should be flat.
Production Process
· Tube Making: The glass raw materials are processed through high-temperature melting, tube drawing, and other processes to make glass tubes.
· Molding: The glass tubes are processed through cutting, heating, blowing, and other processes to form the body and neck shapes of the ampoules.
· Sealing: A high-temperature melting sealing technology is used to seal the ampoule mouth to ensure the sealing performance.
Scope of Application
· Packaging for Injectables: Widely used for the packaging of various injectable drugs, such as antibiotics, vitamins, biological agents, etc.
· Vaccine Packaging: It can be used to contain various vaccines, ensuring the stability and safety of the vaccines during storage and transportation.